Laboratory test

In a 2 day test period all important parameters are being determined, for a fairly accurate sizing for your future Filtration Group Process Systems filter system. This investigation / research / test will be completed by an extensive report.

 

A follow-up plan can be discussed for a Pilot / Test filter unit installation to come to the maximum level of security when it comes to your filtration process, continuity, risk analysis and more.

In a 2 day test period all important parameters are being determined, for a fairly accurate sizing for your future Filtration Group Process Systems filter system. This investigation / research / test will be completed by an extensive report.

 

A follow-up plan can be discussed for a Pilot / Test filter unit installation to come to the maximum level of security when it comes to your filtration process, continuity, risk analysis and more.

Laboratory test

In a 2 day test period all important parameters are being determined, for a fairly accurate sizing for your future Filtration Group Process Systems filter system. This investigation / research / test is being completed by an extensive report.

 

A follow-up plan can be discussed for a Pilot / Test filter unit installation to come to the maximum level of security when it comes to your filtration process, continuity, risk analysis and more.

AMALFC-EN-509-002-labtest-FGC

Skid

If you are looking for a turn-key solution and you do not have enough in-house engineering process technology experience, we can offer a total solution for your filtration problem. Due to its modular construction, we can enlarge an existing installation.

Turn key skid

Filter rescreen and repair

Filtration Group Process Systems - amafilter® - LFC Lochem® offers the best in filter leaf rescreen and repair services for your used or damaged pressure leaf filter screens. Our state of the art manufacturing center in Nowata, Oklahoma, USA and Lochem, the Netherlands allows for the inspection, rescreen, repair or replacement of many 5 ply screens available in the marketplace today.

 

  • The filter leaves function as when they were new
  • Significant savings over the cost of a new leaf
  • Leaves are thoroughly inspected prior to reassembly
  • Process improvement and higher throughput
  • Many leaves can be rescreened up to 2 times for prolonged life
  • Our facilities are capable of handling many screen shapes and configurations including round and rectangle, small or large

 

Filter leaf manufacturing & rescreening

 

One of the special capabilities of Filtration Group Process Systems (amafilter – LFC Lochem) is the manufacturing of new and rescreening of existing filter leaves for pressure leaf filters. In Lochem, the Netherlands we have a state-of-the-art manufacturing plant with a highly skilled and experienced filter leaf team that is focussed on delivering the best quality filter leafs available in the market today.

 

We are able to rescreen all types of filter leaves including circular, rectangular, conical and tubular shaped filter leaves. We are not only able to manufacture and rescreen filter leaves for existing amafilter, LFC Lochem, amafiltergroup or former MAHLE Industrie filtration filters but for many other brands as well.

 

Experience & craftsmanship

 

With a combined experience of over 100 years in pressure leaf filter manufacturing amafilter & LFC Lochem team is able to produce according to the highest quality standards. Our team is well experienced and are highly skilled craftsmen.

 

Quick delivery & competitive pricing

 

We are the preferred supplier to many industrial companies offering a strong knowledge base, short lead times and highly competitive pricing, especially with our ECO range.

 

Our competitive ECO range of filter leaves ensure the quality and standards our customers are used to but at even lower prices. Ask us for more detailed information on our new ECO range.

 

Durability

 

Under normal circumstances, our filter leaves have an expected lifespan up to 10 years and our reinforced leaves up to 20 years. We do even have examples of getting leaves back for the first time for re-screening after 40-over years!

Even after those many years, the filter leaves can often be reconditioned by our team which saves up to 40% of the costs of new filter leaves.

 

We provide a wide range of possibilities here and re-screening becomes an option to extend the lifetime of each leave.

 

Filter leaves to original or improved specifications

 

The design and construction of filter leaves is probably the most critical part of a filter. The filter element is the actual heart of each filter, and many problems with pressure leaf filters are caused by improper leaf constructions and design. The performance of a filter leaf highly depends on the design and the choice of:

 

  • Filter media
  • Drainage and support screen
  • Binder and closure
  • Outlet

 

Filtration Group Process Systems often improves the original design of the filter leaves to improve the performance of the filter, resulting in satisfied customers worldwide.

 

Bolted construction for molten sulfur filtration

 

For some industries where heavy duty filter leaves are needed, we can offer reinforced leaves with bolted construction, stronger frames and an extended lifetime up to 20 years.

 

Better leaves lower the costs of ownership

 

Standard filter leaves employ a 5 ply construction that ensures optimal filtration performance and durability.

Our experience has shown that the 5-ply construction offers you lower ownership costs over time.

filter screen demo

Demo of 5 ply Filter leaf.

 

Filter leaves of many brands and designs

 

Our rescreen capabilities cover a wide range of configurations and manufacturers of leaf filters. We have the capabilities to rescreen many 5–ply filter leaf element designs including, circular, rectangular, conical, and tubular shaped filter leaves, as well as competitor products.

AMALFC-EN-509-001-filter-rescreen-and-repair

Filtering process optimization

In a 2 day test period, observations are being made to optimise the filtration process on:


•The correct filter aid
•The correct dosing
•The correct filter cloth or drain.

AMALFC-EN-509-003 Filtering process

Research & development partnership

If an entirely new filtration process must be designed we can develop it. This differs from a laboratory test, because we are developing a new, never before attempted solution.

AMALFC-EN-509-007 research and development

Rental / Pilot filters

By the use of 10 different rental filters / pilot filters Filtration Group Process Systems - amafilter® - LFC Lochem® can give you full detailed and inside information on hów the type of filter works, the efficiency and speed of our filter systems, on site.

 

Filtration Group Process Systems - amafilter® - LFC Lochem® can accompany the installation, commissioning, for you. Further customer specific requests can be discussed as well.

AMALFC-EN-509-004-pilot-filter

System control

Control your filtration systems with a fully programmed control system designed by Filtration Group Process Systems - amafilter® - LFC Lochem®.

 

This service can be purchased with several days on site support and a control cabinet.

Commissioning

We offer on-site support during the commissioning of your filter so you can start using your system straight away. Filtration Group Process Systems - amafilter® - LFC Lochem® can also provide a (first) process optimization.

AMALFC-EN-509-010-on-site-support-process-systems-filter-system

Process Engineering Package (PEP)

Do you want your process / automation engineering team to have full control of your filtering process?

 

Save up to 100 % of your time on your design and engineering.

 

Wouldn't it be great that we offer your engineers detailed process documentation to ensure the proper working of your newly purchased filter system.

 

With our Process Engineering Package (PEP) Filtration Group Process Systems - amafilter® - LFC Lochem® supplies you with all relevant information to your specific filtering process which is required to design and run your complete system

 

Do you want to learn more? Don't hesitate to contact us directly or your sales representative.

AMALFC-EN-509-005

Laboratory test

In a 2 day test period all important parameters are being determined, for a fairly accurate sizing for your future Filtration Group Process Systems filter system. This investigation / research / test is being completed by an extensive report.

 

A follow-up plan can be discussed for a Pilot / Test filter unit installation to come to the maximum level of security when it comes to your filtration process, continuity, risk analysis and more.

AMALFC-EN-509-002-labtest-FGC

Sample screening

With a half a day of testing you will get an impression if your material can be filtered with our solutions. The sample screening consists of a screening, no reports, a graph with details and remarks, against a very low rate you will get a lot of data on your material to make a decision on your next steps to a success full filtration process.

Filter rescreen and repair

Filtration Group Process Systems - amafilter® - LFC Lochem® offers the best in filter leaf rescreen and repair services for your used or damaged pressure leaf filter screens. Our state of the art manufacturing center in Nowata, Oklahoma, USA and Lochem, the Netherlands allows for the inspection, rescreen, repair or replacement of many 5 ply screens available in the marketplace today.

 

  • The filter leaves function as when they were new
  • Significant savings over the cost of a new leaf
  • Leaves are thoroughly inspected prior to reassembly
  • Process improvement and higher throughput
  • Many leaves can be rescreened up to 2 times for prolonged life
  • Our facilities are capable of handling many screen shapes and configurations including round and rectangle, small or large

 

Filter leaf manufacturing & rescreening

 

One of the special capabilities of Filtration Group Process Systems (amafilter – LFC Lochem) is the manufacturing of new and rescreening of existing filter leaves for pressure leaf filters. In Lochem, the Netherlands we have a state-of-the-art manufacturing plant with a highly skilled and experienced filter leaf team that is focussed on delivering the best quality filter leafs available in the market today.

 

We are able to rescreen all types of filter leaves including circular, rectangular, conical and tubular shaped filter leaves. We are not only able to manufacture and rescreen filter leaves for existing amafilter, LFC Lochem, amafiltergroup or former MAHLE Industrie filtration filters but for many other brands as well.

 

Experience & craftsmanship

 

With a combined experience of over 100 years in pressure leaf filter manufacturing amafilter & LFC Lochem team is able to produce according to the highest quality standards. Our team is well experienced and are highly skilled craftsmen.

 

Quick delivery & competitive pricing

 

We are the preferred supplier to many industrial companies offering a strong knowledge base, short lead times and highly competitive pricing, especially with our ECO range.

 

Our competitive ECO range of filter leaves ensure the quality and standards our customers are used to but at even lower prices. Ask us for more detailed information on our new ECO range.

 

Durability

 

Under normal circumstances, our filter leaves have an expected lifespan up to 10 years and our reinforced leaves up to 20 years. We do even have examples of getting leaves back for the first time for re-screening after 40-over years!

Even after those many years, the filter leaves can often be reconditioned by our team which saves up to 40% of the costs of new filter leaves.

 

We provide a wide range of possibilities here and re-screening becomes an option to extend the lifetime of each leave.

 

Filter leaves to original or improved specifications

 

The design and construction of filter leaves is probably the most critical part of a filter. The filter element is the actual heart of each filter, and many problems with pressure leaf filters are caused by improper leaf constructions and design. The performance of a filter leaf highly depends on the design and the choice of:

 

  • Filter media
  • Drainage and support screen
  • Binder and closure
  • Outlet

 

Filtration Group Process Systems often improves the original design of the filter leaves to improve the performance of the filter, resulting in satisfied customers worldwide.

 

Bolted construction for molten sulfur filtration

 

For some industries where heavy duty filter leaves are needed, we can offer reinforced leaves with bolted construction, stronger frames and an extended lifetime up to 20 years.

 

Better leaves lower the costs of ownership

 

Standard filter leaves employ a 5 ply construction that ensures optimal filtration performance and durability.

Our experience has shown that the 5-ply construction offers you lower ownership costs over time.

filter screen demo

Demo of 5 ply Filter leaf.

 

Filter leaves of many brands and designs

 

Our rescreen capabilities cover a wide range of configurations and manufacturers of leaf filters. We have the capabilities to rescreen many 5–ply filter leaf element designs including, circular, rectangular, conical, and tubular shaped filter leaves, as well as competitor products.

AMALFC-EN-509-001-filter-rescreen-and-repair

Laboratory test

In a 2 day test period all important parameters are being determined, for a fairly accurate sizing for your future Filtration Group Process Systems filter system. This investigation / research / test is being completed by an extensive report.

 

A follow-up plan can be discussed for a Pilot / Test filter unit installation to come to the maximum level of security when it comes to your filtration process, continuity, risk analysis and more.

AMALFC-EN-509-002-labtest-FGC

Filter rescreen and repair

Filtration Group Process Systems - amafilter® - LFC Lochem® offers the best in filter leaf rescreen and repair services for your used or damaged pressure leaf filter screens. Our state of the art manufacturing center in Nowata, Oklahoma, USA and Lochem, the Netherlands allows for the inspection, rescreen, repair or replacement of many 5 ply screens available in the marketplace today.

Skid

If you are looking for a turn-key solution and you do not have enough in-house engineering process technology experience, we can offer a total solution for your filtration problem. Due to its modular construction, we can enlarge an existing installation.

We are here for you!

To learn more about Filtration Group Process Systems, our brands amafilter® & LFC Lochem® or our products like the Cricketfilter please contact us.

 

No query is too small for our dedicated customer service team.

Contact Process Systems